High Density Tungsten Alloy (W-Ni-Cu)Rod
Composition: W/Ni/Cu
Catalog No.: RF74C-Rod
Material purity: 99.95%
Typical lead time: 3 weeks
- Product Details
W-Ni-Cu tungsten alloy introduction
The W-Ni-Cu heavy density alloy, also known as tungsten-nickel-copper alloy, is a specialized material renowned for its exceptional density, mechanical strength, and electrical conductivity. This alloy combines the advantages of tungsten, nickel, and copper, resulting in a heavy and versatile material that finds applications in various industries.
Tungsten, with its high density and exceptional hardness, forms the primary component of the alloy, providing excellent weight-to-volume ratio and superb resistance to wear and corrosion. Nickel and copper are added to enhance the mechanical and electrical properties of the alloy.
The W-Ni-Cu alloy exhibits excellent strength, toughness, and machinability, making it suitable for a wide range of applications. It is commonly used in aerospace and defense industries for components such as ballast weights, vibration-damping parts, and radiation shielding materials. Its high density allows for precise weight distribution, while its mechanical strength ensures durability in demanding environments.
Additionally, the W-Ni-Cu alloys electrical conductivity makes it suitable for electrical and electronic applications. It is often utilized in electrical contacts, heat sinks, and electrical discharge machining (EDM) electrodes.
QSAMs W-Ni-Cu rod
W-Ni-Cu tungsten alloy rod is a regular product for QSs tungsten product line. W-Ni-Cu is a very important high density tungsten alloys. Compared with steel, rod has much higher thermal conductivity with much smaller thermal expansion coefficient. The application of W-Ni-Cu high density tungsten alloys are focused on its high density and hardness. Thus, tungsten alloy has been the most important material for armor piercing shell and fragments. It also consumed in large quantity as cutting tools and aviation industries.
Properties of W-7Ni-3Fe (Class One)
Hardness, Rockwell C |
25 - 32 |
|
Tensile Strength, Ultimate |
895 MPa |
|
Tensile Strength, Yield |
615 Mpa (0.002) |
|
Elongation at Break |
0.1 |
|
Modulus of Elasticity |
310 GPa |
|
Electrical Resistivity |
0.00001731 ohm-cm |
|
CTE, linear |
4.61 ?m/m-??C |
|
Thermal Conductivity |
18.0 W/m-K |
|
Element Composition |
||
Iron, Fe |
3% |
|
Nickel, Ni |
7% |
|
Tungsten, W |
90% |
|
* W-3.5Ni-1.5Fe(Class 3 tungsten alloy) and W-5.25Ni-2.25Fe(Class 2 tungsten alloy) are also available. |
|
Packaging W-Ni-Cu rod
Tungsten is stable in air and packed without vacuum seal, unless requested. Wooden crater is applied when the cargo is over weight.
*Mill report available for our tungsten rod.
Related Product